Self-adhesive spacer tapes help bonding of slim mobile phones

Christina Barg-Becker looks at bonding technology being used in slim phones
Read

Read More

Closer integration of reverse engineering and CAD techniques

Both reverse engineering and three-dimensional CAD are established techniques, but using the two together has not always been as easy as it could be
Read

Read More

ISMI Readies 450 mm Equipment Metrics

TOP STORY... April 7, 2009

The ISMI 450 mm program is moving from wafer handling tests to developing guidelines for early 450 mm wafer process equipment. The consortium posted equipment performance metrics (EPMs) to its website for the major tool types needed for a demonstration line. "Test wafer equipment development and demonstrations are on track starting by the middle of 2009," said Tom Jefferson, 450 mm program manager.
Read more >>

Read More

News from Materials Research Society - 2009 March

Materials in Focus

Picoscale stability in a room-temperature AFM

A research team has shown how to detect and monitor the tiny amount of light reflected directly off the needle point of an atomic force microscope probe, and in so doing has demonstrated a 100-fold improvement in the stability of the instrument’s measurements under ambient conditions. The team was able to control the probe’s position in three dimensions to better than 40 picometers over 100 seconds. In imaging applications, they showed the long-term drift at room temperature was a mere 5 picometers per minute, a 100-fold improvement over the best previous results under ambient conditions.

Omnidirectional printing of silver microelectrodes for flexible electronics

Researchers show how metal can be added to components within flexible electronic devices, enabling conductivity to be maintained even after repeated deformation. They used inkjet printing to create three-dimensional (3D) metallic connections between functional components of flexible devices. Controlling the deposition of the colloidal silver ink is essential for fabricating freestanding wires that have both 2D and 3D components. The electrical connections demonstrated by the researchers include springs and structures with built-in slack to accommodate the stretching and bending of a flexible device.

Oblique angle deposition for mass production of metamaterials

Though metamaterials have generated a lot of interest in the last few years, the ones made so far have only worked over a limited range of frequencies and are difficult to produce in large quantities. Taking a different approach, researchers have turned their attention to a more established production technique known as “oblique angle deposition” (OAD) which involves depositing vapor at an angle onto a substrate held in a vacuum. The formed film thickness was 240 nm and the angle between the normal to the substrate and the tilt of the nanorods was maintained at 66 degrees. Silver nanorods were grown to about 650 nm long and 80 nm wide.

TEM images 47 picometer spacing of a Ge crystal

Hailed as the world’s most powerful transmission electron microscope, an instrument has clinched another world first - resolving matter to less than half an angstrom with high contrast. The microscope has been tweaked by researchers to resolve a 47 picometer spacing in a Germanium crystal. The TEM corrects for spherical blurring caused by “aberrations” in the lens. They also optimized the electron probe itself.

Nano Focus

Carbon nanotube aerogel forms superelastic artificial muscle

_{As light as air, yet stronger than steel and bendier than rubber. A new material made from bundles of carbon nanotubes combines all of these characteristics in a substance that twitches like a muscle when a voltage is applied. The 'artificial muscle' is an aerogel drawn into a long ribbon. It can expand about 4,000 times faster than human muscle does, and can be switched on and off up to 1,000 times a second with no deterioration.}

_{Graphene makes good microwave switch}

_{A research team has shown that graphene flakes can enable and disable the propagation of high-frequency electromagnetic fields up to 60 GHz when a DC voltage is applied. The switching time is very short at less than 1 ns, which is among the fastest ever observed in such a device. The device is a microwave NEMS switch that comprises a coplanar waveguide and an array of metallic graphene sheets suspended over it.}

_{Bio Focus}

_{Flow sensors based on hair structures of blind cavefish}

_{A blind fish that has evolved a unique technique for sensing motion may inspire a new generation of sensors that perform better than current active sonar. Although members of the fish speciesAstyanax fasciatus cannot see, they sense their environment and the movement of water around them with gel-covered hairs that extend from their bodies. Their ability to detect underwater objects and navigate through their lightless environment inspired a group of researchers to mimic the hairs of these blind cavefish in the laboratory. They conducted preliminary experiments with a simple artificial hair cell microsensor made of SU-8, a common epoxy-based polymer capable of solidifying, and built with conventional CMOS microfabrication technology.}

_{Polymer coats multi-task in drug delivery}

_{Polymer spheres with a sugar coating on the outside and a plastic coating on the inside have been developed. This gives them dual functionality to target and deliver drugs. Researchers made the spheres by dissolving glycosylated polybutadiene-poly(ethylene oxide) block copolymers in water. When dissolved, the copolymers spontaneously formed hollow colloids called vesicles with a glucose coating on the outside and a poly(ethylene oxide) coating on the inside. The polymer vesicles could be used as living cell mimics or drug delivery vessels.}

Read More

SWCNTs May Offer Cooler Interconnects

TOP STORY... April 6, 2009

University at Buffalo engineers recently proved with quantum mechanics that single-walled carbon nanotubes (SWCNTs) offer "cooling" properties far superior to those provided by metals in electronics. Nanotubes could replace many of the metals used in ICs now, argues Cemal Basaran, director of the university's Electronic Packaging Laboratory. "We've reached the point where metals just don't cut it in very small-scale electronics with high current densities," he said.

Read more >>

Read More

'Tuned' Graphene Points to Faster Chips

TOP STORY... April 2, 2009

'Tuned' Graphene Points to Faster Chips 
Researchers at Rensselaer Polytechnic Institute have determined that the chemistry of the surface on which graphene is deposited plays a key role in shaping the material's conductive properties. Simulations show that when deposited on a surface treated with oxygen, graphene shows semiconducting properties, and when deposited on a material treated with hydrogen, it exhibits metallic properties. 
Read more >>

Read More

Micro-manufacturing for specialist processes
Miniaturisation is not new, but manufacturing mechanical, electromechanical and fluidic components on a micro scale is rapidly developing into a recognisable industry in itself
Read

Securing industrial control systems against of cyber infection
We are all aware of the need to protect desktop computers from viruses and other malware, but what about industrial systems?
Read

Mobilising machine parts to meet manufacturing challenges
Stefan Pulver explains the advantages of getting components from a single source
Read

Digital blending provides product consistency
Solution instantaneously controls the metering of ingredients based on volume or material characteristics
Read

Increasing electronics content sets new thermal challenges
Materials and approaches to solving thermal, grounding and shielding applications in vehicles have evolved at pace in recent years
Read

Reverse buckling bursting disc for accurate pressure relief
The UBR Bursting Disk combines resistance to vacuum with the ability to operate up to 95 per cent of its minimum burst pressure
Read

Read More